Live wall
The Live Wall tab shows live video from every enabled camera in one grid. Anyone who can sign in can open it.
Open the live wall
- Open Live Wall.
- Each enabled camera gets a tile with its name and status:
- LIVE: the camera's edge node is online and streaming.
- OFFLINE: the camera's edge node has stopped sending heartbeats.
- UNASSIGNED: no edge node processes the camera. Assign one in Cameras & Edge Nodes. See Cameras.
- Pick a grid density at the top right, or leave it on auto.
- Click Enlarge Stream on a tile to watch one camera large. Click Close to go back.
- Click Refresh to reconnect every stream.
The header shows how many cameras are live and how many are offline or on standby. Disabled cameras don't appear. If no camera is enabled, the tab shows No Enabled Cameras.
How the video gets to your browser
The live wall shows the frames the edge node already reads for detection, as an MJPEG stream of about 10 frames a second. It never opens a second connection to the camera, so it doesn't count against the camera's own connection limit.
Your browser loads each stream from the same HTTPS address as the dashboard, under /edge/<node name>/. The site's HTTPS entrypoint passes it on to the right edge node. Nothing else needs to be reachable from your computer, and there is no plain-HTTP connection for the browser to block. See Install.
Each stream address carries a signed token that the site node issues to signed-in users and that expires after 5 minutes. A stream that is already playing keeps running. When a tile has to reconnect, the dashboard fetches a fresh address. A stream address copied out of the dashboard stops working once its token expires.
Limits
- Up to 5 people can watch the same camera's live stream at once. Another viewer gets an error until someone closes the stream.
- If the camera stops sending video, the tile freezes on the last good frame until the stream comes back.
- The live wall shows live video only. To watch what happened earlier, open the alert's clip. See Alerts and clips.
If a tile stays dark
- Check that the camera is enabled and assigned to an edge node that is online, in Cameras & Edge Nodes.
- Admins can see and change the address the browser uses for each edge node under Cameras & Edge Nodes, Edge Nodes. Leave it at the default
/edge/<node name>unless your administrator set up something else. An address that starts withhttp://doesn't work from an HTTPS dashboard.